Advertisement
show hardware system-flow
show interfaces stack-unit
show processes memory
(S-Series)
show processes ipc flow-control
c e s
Display the Single Window Protocol Queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp | rp1 | rp2 | lp linecard-number]
Parameters
cp
rp1
rp2
lp linecard-number
* In the S-Series, this command supports only the cp keyword, not the rp1, rp2, and lp options. See
Figure 5-46
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
Version 8.1.1.0
History
Version 7.6.1.0
Version 7.5.1.0
Display Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
Display information on all interfaces on a specific S-Series stack member.
Display CPU usage information based on processes running in an S-Series
(OPTIONAL) Enter the keyword
statistics.
(OPTIONAL) Enter the keyword
statistics on Route Processor 1.*
(OPTIONAL) Enter the keyword
statistics on Route Processor 2.*
(OPTIONAL) Enter the keyword
Control Processor's SWPQ statistics on the specified line card.*
.
Introduced on E-Series ExaScale
Introduced on S-Series
Introduced on C-Series and E-Series
cp
to view the Control Processor's SWPQ
rp1
to view the Control Processor's SWPQ
rp2
to view the Control Processor's SWPQ
lp
followed by the line card number to view the
Control and Monitoring | 131
Advertisement
