Dell Force10 TeraScale E Series Reference Manual page 103

Command
Version 8.1.1.0
History
Version 7.6.1.0
Version 7.5.1.0
E-Series original Command
E-Series Example Figure 5-10. Command Example: show alarms on E-Series
FTOS# show alarms
--
Alarm Type
----------------------------------------------------
RPM 0 PEM A failed or rmvd
SFM 0 PEM A failed or rmvd
SFM 1 PEM A failed or rmvd
SFM 2 PEM A failed or rmvd
SFM 3 PEM A failed or rmvd
SFM 4 PEM A failed or rmvd
SFM 5 PEM A failed or rmvd
SFM 6 PEM A failed or rmvd
SFM 7 PEM A failed or rmvd
line card 1 PEM A failed or rmvd
line card 4 PEM A failed or rmvd
only 8 SFMs in chassis
--
Alarm Type
----------------------------------------------------
No major alarms
FTOS#
show chassis
c e
View the configuration and status of modules in the system. Use this command to determine the
chassis mode.
Syntax show chassis [brief]
Parameters
brief
Command Modes
EXEC
EXEC Privilege
Command
Version 8.1.1.0
History
Version 7.5.1.0
E-Series original Command
Introduced on E-Series ExaScale
Introduced on S-Series
Introduced on C-Series
Minor Alarms --
Major Alarms --
(OPTIONAL) Enter the keyword
Introduced on E-Series ExaScale
Introduced on C-Series
Duration
7 hr, 37 min
7 hr, 37 min
7 hr, 37 min
7 hr, 37 min
7 hr, 37 min
7 hr, 37 min
7 hr, 37 min
7 hr, 37 min
7 hr, 36 min
7 hr, 36 min
7 hr, 36 min
7 hr, 35 min
Duration
brief
to view a summary of the show chassis output.
Control and Monitoring | 103