Advertisement
show interface management ethernet
c es
Syntax
Command Modes
Command
History
Example
Example
Related
Commands
72
|
BOOT_USER Mode
Display the IP address configured for the Management interface.
show interface management ethernet
BOOT_USER
Version 7.8.1.0
Introduced on S-Series
Figure 4-9. show interface management ethernet Command Example
BOOT_USER # show interfaces management ethernet
Management ethernet IP address: 10.16.1.181/24
BOOT_USER #
On the S-Series, the output of this command includes the MAC address and port number of the
assigned management port.
Figure 4-10. show interface management ethernet Command Example
BOOT_USER # show interface management ethernet
Management ethernet IP address: 10.16.1.181/24
Management ethernet MAC address: 00:01:e8:43:13:16
Management ethernet port number: 1
BOOT_USER #
interface management ethernet ip address
interface management port config
Assign an IP address to the Management Ethernet
interface.
Configure speed, duplex, and negotiation settings for the
management interface.
Advertisement
