Advertisement
Command
History
Usage
Information
Related
Commands
Example
banner motd
c e s
Syntax
Parameters
Defaults
Command Modes
76
|
Control and Monitoring
Version 8.2.1.0
Introduced
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
E-Series original Command
A login banner message is displayed only in EXEC Privilege mode after entering the enable
command followed by the password. These banners are not displayed to users in EXEC mode.
banner exec
Sets a banner to be displayed when you enter EXEC Privilege mode.
banner motd
Sets a Message of the Day banner.
Figure 5-1. Command Example: banner login
FTOS(conf)#banner login ?
keyboard-interactive
LINE
FTOS(conf)#no banner login ?
keyboard-interactive
<cr>
FTOS(conf)#banner login keyboard-interactive
Enter TEXT message.
This is the banner%
FTOS(conf)#end
FTOS#exit
13d21h9m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user on line
console
This is the banner
FTOS con0 now available
Press RETURN to get started.
13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user
console
This is the banner
FTOS>
Set a Message of the Day (MOTD) banner.
banner motd c line c
c
Enter a delineator character to specify the limits of the text banner. In the above figures, the %
character is the delineator character.
line
Enter a text string for your message of the day banner message ending the message with your
delineator.
In the example figures above, the delineator is a percent character (%).
No banner is configured.
CONFIGURATION
keyboard-interactive
Press enter key to get prompt
c banner-text c, where 'c' is a delimiting character
Prompt will be displayed by default
End with the character '%'.
keyword
on line
Advertisement
