Advertisement
Example
Figure 24-18. show ip management route Command Example
FTOS#show ip management-route
Destination
-----------
10.1.2.0/24
172.16.1.0/24
FTOS#
show ipv6 management-route
c e
Display the IPv6 static routes configured for the management interface.
Syntax
show ipv6 management-route [all | connected | summary | static]
Parameters
all
connected
summary
static
Command Modes
EXEC Privilege
Command
Version 8.4.1.0
History
Example
FTOS#show ipv6 management-route
IPv6 Destination
----------------
2001:34::0/64
2001:68::0/64
FTOS#
show ip protocols
c e s
View information on all routing protocols enabled and active on the switch.
Syntax
show ip protocols
Command Modes
EXEC
EXEC Privilege
Command
Version 8.1.1.0
History
Version 7.6.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version 6.1.1.0
Gateway
-------
ManagementEthernet 0/0
10.1.2.4
all
Enter the keyword
interfaces on the switch.
connected
Enter the keyword
Management interface.
summary
Enter the keyword
non-active routes and their sources.
static
Enter the keyword
Introduced
Gateway
-------
ManagementEthernet 0/0
2001:34::16
Introduced on E-Series ExaScale
Regular evaluation optimization enabled/disabled added to display output
Introduced on S-Series
Introduced on C-Series
Introduced for E-Series
State
-----
Connected
Active
to view all IP addresses assigned to all Management
to view only routes directly connected to the
to view a table listing the number of active and
to view non-active routes also.
State
-----
Connected
Active
IPv4 Routing | 671
Advertisement
