Advertisement
ipv6 mld snooping
e
Enable MLD Snooping (v1 and v2) on a VLAN.
ipv6 mld snooping
Syntax
To disable MLD Snooping, use the no ipv6 mld snooping command.
Defaults
Enabled on all VLAN interfaces
Command Modes
INTERFACE VLAN (conf-if-vl-n)
Command
Version 7.4.1.0
History
ipv6 mld snooping explicit-tracking
e
Enable explicit MLD Snooping tracking on an interface.
ipv6 mld snooping explicit-tracking
Syntax
To disable, use the no ipv6 mld snooping explicit-tracking command.
Defaults
Disabled
Command Modes
INTERFACE VLAN (conf-if-vl-n)
Command
Version 7.4.1.0
History
Usage
Whether the switch is the Querier or not, if snooping is enabled, the switch tracks all MLD joins. It has
Information
separate explicit tracking table which contains group, source, interface, VLAN and reporter details.
Related
show ipv6 mld snooping groups
Commands
ipv6 mld snooping mrouter
e
Configure a Layer 2 port as a multicast router port.
Syntax
ipv6 mld snooping mrouter interface {interface}
Parameters
interface
interface
Defaults
No default values or behavior
Introduced
Introduced
interface
Enter the keyword
Enter the following keywords and slot/port or number information:
•
For a 1-Gigabit Ethernet interface, enter the keyword
the slot/port information.
•
For a Port Channel interface, enter the keyword
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
•
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
to indicate the next-hop interface to the multicast router.
GigabitEthernet
port-channel
TenGigabitEthernet
Multicast Listener Discovery (MLD) | 923
followed by
followed by a number:
Advertisement
