Advertisement
Related
Commands
log-only
c e
Syntax
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
508
|
FTOS Service Agent
The default severity level of 7 is the recommended severity level. Lower values will result in partial
log data sent to the server because messages with higher values are filtered out.
call-home
Start FTSA and Enter the FTSA mode.
log-only
Select the information collection action that matches the selected test group.
logging buffered
Enable logging and specify which messages are logged to an internal buffer. By default,
all messages are logged to the internal buffer.
show logging
Display the logging settings and system messages logged to the internal buffer of the
switch.
Execute this command if you want FTSA data to be collected in a local log rather than to be sent to
configured FTSA recipients.
[no] log-only
"no log-only"
conf-callhome-actionlist-name
Version 7.7.1.0
Introduced on C-Series and E-Series
If you execute this command, data gathered by the action list invoked by the default-action
command will be saved in a local file. The file will have the same name as the action list and with a
time stamp appended to the file name.
When saved in flash, the file name format is:
flash:/<actionlistName>-<timestamp>.ftsa
For example: flash:/hardwareAction- 02_16_34 423.ftsa
Because the time stamp makes each file unique, files will not be overwritten if the action list executes
more than once. If this log-only command is not executed, or if no log-only option is executed, then
the collected data will be sent in an FTSA email.
When sent as an mail attachment, the file name format is:
<actionlistName>-<timestamp>.txt
For example: hardwareAction-02_16_34 423.txt
If the collected data is split due to a size limit, a sequential version number will be added to it.
For example: hardwareAction-02_16_34 423_0.txt
call-home
Start FTSA and Enter the FTSA mode.
default-action
Select the information collection action that matches the selected test group.
Advertisement
