Advertisement
C-Series
Example
150
|
Control and Monitoring
Figure 5-59. Command Example: show tech-support (partial) on C-Series
FTOS#show tech-support page
----------------------------------- show version -------------------------------
Force10 Networks Real Time Operating System Software
Force10 Operating System Version: 1.0
Force10 Application Software Version: FTOS 7.5.1.0
Copyright (c) 1999-2007 by Force10 Networks, Inc.
Build Time: Tue Sep 12 15:39:17 IST 2006
Build Path: /sites/maa/work/sw//C-SERIES/SW/SRC
Force10 uptime is 18 minutes
System image file is "/work/sw/IMAGES/Chassis/C300-ODC-2/FTOS-CS.bin"
Chassis Type: C300
Control Processor: IBM PowerPC 750FX (Rev D2.2) with 1073741824 bytes of memory.
128K bytes of non-volatile configuration memory.
1 Route Processor/Switch Fabric Module
2 48-port GE 10/100/1000Base-T line card with RJ45 interface (CB)
1 FastEthernet/IEEE 802.3 interface(s)
96 GigabitEthernet/IEEE 802.3 interface(s)
----------------------------------- show HA information -------------------
--
RPM Status
--
------------------------------------------------
RPM Slot ID:
RPM Redundancy Role:
RPM State:
RPM SW Version:
Link to Peer:
Peer RPM:
--
RPM Redundancy Configuration
------------------------------------------------
Primary RPM:
Auto Data Sync:
Failover Type:
Auto reboot RPM:
Auto failover limit:
...more----
0
Primary
Active
CS-1-1-317
Down
not present
--
rpm0
Full
Hot Failover
Disabled
3 times in 60 minutes
Advertisement
