Download Print this page

Dell Force10 TeraScale E Series Reference Manual page 735

Ftos command line, ftos 8.4.2.7

Advertisement

address-family
c e
Enable the IPv4 multicast or the IPv6 address family.
t
Syntax
address-family [ipv4 multicast| ipv6unicast]
Parameters
ipv4 multicast
ipv6 unicast
Defaults
Not configured.
Command Modes
ROUTER BGP
neighbor update-source
neighbor weight
network
network backdoor
redistribute
redistribute isis
redistribute ospf
router bgp
show capture bgp-pdu neighbor
show config
show ip bgp ipv6 unicast
show ip bgp ipv6 unicast cluster-list
show ip bgp ipv6 unicast community
show ip bgp ipv6 unicast community-list
show ip bgp ipv6 unicast dampened-paths
show ip bgp ipv6 unicast detail
show ip bgp ipv6 unicast extcommunity-list
show ip bgp ipv6 unicast filter-list
show ip bgp ipv6 unicast flap-statistics
show ip bgp ipv6 unicast inconsistent-as
show ip bgp ipv6 unicast neighbors
show ip bgp ipv6 unicast peer-group
show ip bgp ipv6 unicast summary
show ip bgp next-hop
show ip bgp paths
show ip bgp paths as-path
show ip bgp paths community
show ip bgp paths extcommunity
show ip bgp regexp
timers bgp
Enter BGPv4 multicast mode.
Enter BGPv6 mode.
IPv6 Border Gateway Protocol (IPv6 BGP) | 735

Advertisement

loading