Dell Force10 TeraScale E Series Reference Manual page 450

Command Modes
Command
History
Related
Commands
configure replace
c e
Syntax
Parameters
Defaults
Command Modes
Command
History
configure terminal
c e
Syntax
Parameters
Defaults
Command Modes
Usage
Information
Command
History
450 | Configuration Rollback
EXEC Privilege
Version 7.6.1.0 Introduced on C-Series and E-Series
show archive Display the archive
Replace the running configuration with a specified file.
configure replace {flash://filepath | startup-config [force | time seconds]}
flash://filepath
startup-config force
force
time seconds
No default values or behavior
EXEC Privilege
Version 7.6.1.0
Enter the exclusive configuration mode when the confutation mode is set to manual.
configure terminal [lock]
To undo the lock, use the exit command.
lock
(OPTIONAL) Enter the keyword
Unlocked
EXEC Privilege
Archiving/replacing a configuration automatically locks CONFIGURATION mode. Use this command
when you want exclusive control of CONFIGURATION mode when making configuration changes.
Version 7.6.1.0
flash: //
Enter the path . followed by the file path of the local file system to
copy your file to the local location.
startup-config
Enter the keyword
configuration and force the replacement without confirmation.
force
Enter the keyword to replace the startup configuration without
confirmation.
time
Enter the keyword to replace with the startup configuration and
designate the time with which you have to confirm the replacement of the
running configuration.
Range: 60 to 1800 seconds
Introduced on C-Series and E-Series
lock
to lock the confirmation in an exclusive mode.
Introduced on C-Series and E-Series
to replace with the startup