Advertisement
Command
Version 8.3.7.0
History
Version 8.3.1.0
mep cross-check
s
Enable cross-checking for an MEP.
Syntax
mep cross-check mep-id
Parameters
mep-id
Defaults
None
Command Modes
ECFM DOMAIN
Command
Version 8.3.7.0
History
Version 8.3.1.0
mep cross-check enable
s
Enable cross-checking.
Syntax
mep cross-check enable {port | vlan-id}
Parameters
port
vlan-id
Defaults
None
Command Modes
ECFM DOMAIN
Command
Version 8.3.7.0
History
Version 8.3.1.0
mep cross-check start-delay
s
Configure the amount of time the system waits for a remote MEP to come up before the cross-check
operation is started.
mep cross-check start-delay number
Syntax
Parameters
start-delay number
Defaults
3 ccms
Introduced on the S4810.
Introduced on S-Series
Enter the MEP ID
Range: 1-8191
Introduced on the S4810.
Introduced on S-Series
Down service with no VLAN association.
Enter the VLAN to apply the cross-check.
Introduced on the S4810.
Introduced on S-Series
Enter a start-delay in seconds.
Range: 3-100 seconds
802.1ag | 169
Advertisement
