Advertisement
Defaults
None.
Command Mode
EXEC Privilege
Command
Version 7.7.1.0
History
Version 7.5.1.0
Example
Command example: restore fpga-image
FTOS#restore fpga-image linecard 4
Current FPGA information in the system:
=======================================
------------------------------------------------------------------------
Restore fpga image for linecard 4 [yes/no]: yes
FPGA restore in progress. Please do NOT power off the card.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Upgrade result :
================
Linecard 4 FPGA restore successful.
Usage
Reset the card using the power-cycle option after restoring the FPGA command.
Information
Related
reset
Commands
upgrade fpga-image
c
Upgrade the primary FPGA image.
Syntax
upgrade fpga-image {rpm {number | all}| linecard {number | all} [system-fpga | link-fpga]
| all} {booted | file-url}
Parameters
rpm number
linecard number
all
Renamed keyword
Introduced on C-Series
Card
LC4
48 Port 1G LCM FPGA
***********************************************************************
*
Warning - Upgrading FPGA is inherently risky and should
*
only be attempted when necessary.
*
cause a board RMA.
***********************************************************************
Reset a card.
primary-fpga-flash
FPGA Name
Current Version
A failure at this upgrade may
Proceed with caution !
rpm
Enter
followed by the RPM slot number to upgrade an RPM FPGA
Range: 0-1
linecard
Enter
followed by the line card slot number to upgrade a
linecard FPGA.
Range: 0-7 on the C300, 0-3 on the C150
all
Enter the keyword
to upgrade all RPM and linecard FPGAs. Enter the
all
keyword
after the keyword
all
Enter the keyword
after the keyword
on all linecards.
fpga-image
to
.
New Version
A: 3.6
restore
rpm
to upgrade all FPGAs on all RPMs.
linecard
to upgrade all FPGAs
File Management | 57
*
*
*
Advertisement
