Advertisement
Command Modes
Usage
Information
Related
Commands
Command
History
redistribute
c e
s
t
Syntax
Parameters
Defaults
Command Modes
Usage
Information
Related
Commands
408
|
Border Gateway Protocol IPv4 (BGPv4)
ROUTER BGP Address Family (conf-router_bgp_af)
resolves the network address configured by the
FTOS
routing table to ensure that the networks are reachable via non-BGP routes and non-default routes.
redistribute
Version 7.8.1.0
Introduced support on S-Series
Version 7.7.1.0
Introduced support on C-Series
Version 7.6.1.0
Introduced IPv6 MGBP support for E-Series
Redistribute routes into BGP.
redistribute [connected | static] [route-map map-name]
To disable redistribution, use the no redistribution [connected | static] [route-map
map-name] command.
connected
Enter the keyword
interfaces.
static
Enter the keyword
These routes are treated as incomplete routes.
route-map
(OPTIONAL) Enter the keyword
map-name
route map.
Only the following ROUTE-MAP mode commands are supported:
•
match ip address
•
set community
•
set local-preference
•
set metric
•
set next-hop
•
set origin
•
set weight
If the route map is not configured, the default is deny (to drop all routes).
Not configured.
ROUTER BGP Address Family (conf-router_bgp_af)
If you do not configure
default-metric
route map to set the metric, the metric for redistributed static and connected is "0".
To redistribute the default route (0.0.0.0/0) configure the
neighbor default-originate
network
Redistribute routes into BGP.
connected
to redistribute routes from physically connected
static
to redistribute manually configured routes.
route-map
command, in addition to the
Inject the default route.
command with the routes in the main
followed by the name of an established
redistribute
command, or there is no
neighbor default-originate
command.
Advertisement
