Advertisement
Command
Version 8.4.2.1
History
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Usage
The
Information
show config
c e s
View the current route map configuration.
Syntax
show config
Command Modes
ROUTE-MAP
Command
Version 8.4.2.1
History
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Figure 25-10. Command Example: show config
Example
FTOS(config-route-map)#show config
!
route-map Rmap1 permit 10
show route-map
c e s
View the current route map configurations.
Syntax
show route-map
Command Modes
EXEC
EXEC Privilege
Command
Version 8.4.2.1
History
Version 8.2.1.0
Version 7.8.1.0
Version 7.4.1.0
Introduced on the S-Series
Introduced support on the E-Series ExaScale
Introduced support on the C-Series
Introduced support on the E-Series TeraScale
set ipv6 next-hop
command is the only way to set an IPv6 Next-Hop.
Introduced on the S-Series
Introduced support on the E-Series ExaScale
Introduced support on the C-Series
Introduced support on the E-Series TeraScale
match ip address v4plist
match ipv6 address plist1
match ipv6 next-hop prefix-list plist2
match ipv6 route-source prefix-list plist3
set next-hop 1.1.1.1
set ipv6 next-hop 3333:2222::
Introduced on the S-Series
Introduced support on the E-Series ExaScale
Introduced support on the C-Series
Introduced support on the E-Series TeraScale
IPv6 Access Control Lists (IPv6 ACLs) | 713
Advertisement
