Enable Dchp Snooping; Add A Static Entry In The Binding Table; Clear The Binding Table; Display The Contents Of The Binding Table - Dell Force10 S4810P Configuration Manual

Enable DCHP Snooping

Step Task
1 Enable DHCP Snooping globally.
2 Specify ports connected to DHCP servers as trusted.
3 Enable DHCP Snooping on a VLAN.

Add a static entry in the binding table

Task
Add a static entry in the binding table.

Clear the binding table

Task
Delete all of the entries in the binding table

Display the contents of the binding table

Task
Display the contents of the binding table.
Command Syntax
ip dhcp snooping binding mac
Command Syntax
clear ip dhcp snooping binding
Command Syntax
show ip dhcp snooping
Command Syntax
ip dhcp snooping
ip dhcp snooping trust
ip dhcp snooping vlan
Command Mode
EXEC Privilege
Command Mode
EXEC Privilege
Command Mode
EXEC Privilege
Dynamic Host Configuration Protocol (DHCP) | 389
Command Mode
CONFIGURATION
INTERFACE
CONFIGURATION