Advertisement
clear dampening
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Example
Related
Commands
cx4-cable-length
s
Syntax
Parameters
564
|
Interfaces
Clear the dampening counters on all the interfaces or just the specified interface.
clear dampening [interface]
interface
Without a specific interface specified, the command clears all interface dampening counters
EXEC Privilege
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Introduced on S-Series
Version 7.5.1.0
Introduced on C-Series
Version 7.4.1.0
Introduced on E-Series
FTOS#clear dampening gigabitethernet 1/2
Clear dampening counters on Gi 1/2 [confirm] y
FTOS#
show interfaces dampening
dampening
Configure the length of the cable to be connected to the selected CX4 port.
[no] cx4-cable-length {long | medium | short}
long
|
medium
|
short
(Optional) Enter one of the following keywords and slot/port or number
information:
•
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
•
For a Port Channel interface, enter the keyword
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to
512 for ExaScale.
•
For a SONET interface, enter the keyword
port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
Display
interface dampening information.
Configure dampening on an interface.
Enter the keyword that matches the cable length to be used at the selected
port:
short
= For 1-meter and 3-meter cable lengths
medium
= For 5-meter cable length
long
= For 10-meter and 15-meter cable lengths
port-channel
sonet
followed by the slot/
followed by the slot/port information.
Advertisement
