Advertisement
Command Modes
EXEC
EXEC Privilege
Command
Version 8.4.2.1
History
Version 8.2.1.0
Version 7.4.1.0
Related
capture bgp-pdu neighbor (ipv6)
Commands
show capture bgp-pdu neighbor
clear ip bgp * (asterisk)
Reset all BGP sessions in the specified category on the E-Series. The soft parameter (BGP Soft
c e
Reconfiguration) clears the policies without resetting the TCP connection.
Syntax
clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast soft [in | out] | soft [in | out]]
Parameters
*
ipv4 multicast soft
ipv6 unicast soft
soft
in
out
Command Modes
EXEC Privilege
Command
Version 8.4.2.1
History
Version 8.2.1.0
Version 7.4.1.0
clear ip bgp as-number
Reset BGP sessions on the E-Series. The soft parameter (BGP Soft Reconfiguration) clears the policies
c e
without resetting the TCP connection.
Syntax
clear ip bgp as-number [flap-statistics | ipv4 {multicast {flap-statistics | soft {in | out}} |
unicast {flap-statistics | soft {in | out}} | ipv6 unicast {flap-statistics | soft {in | out}| soft
[in | out]
Introduced on C-Series and S4810.
Introduced on E-Series ExaScale
Introduced on E-Series TeraScale
Enable capture of an IPv6 BGP neighbor packet.
Configure a route reflector and clients.
Enter an asterisk (
[
|
]
(OPTIONAL) This keyword sequence sets options within the a
in
out
specified IPv4 address family.
[
|
]
(OPTIONAL) This keyword sequence sets options within the a
in
out
specified IPv6 address family.
(OPTIONAL) Enter the keyword
policies without resetting the BGP TCP session, that is, BGP Soft
Reconfiguration.
Note:
If you enter
inbound and outbound policies are reset.
(OPTIONAL) Enter the keyword
policies.
(OPTIONAL) Enter the keyword
policies.
Introduced on C-Series and S4810.
Introduced on E-Series ExaScale
Introduced on E-Series TeraScale
* )
to reset all BGP sessions.
soft
to configure and activate
clear ip bgp ip6-address soft
in
to activate only inbound
out
to activate only outbound
IPv6 Border Gateway Protocol (IPv6 BGP) | 749
, both
Advertisement
