Advertisement
show mac accounting destination
e
Syntax
Parameters
Command Modes
Command
History
Usage
Information
Example
Related
Commands
884
|
Layer 2
destination counters for Layer 2 traffic (available on physical interfaces only).
Display
show mac accounting destination [mac-address vlan vlan-id] [interface interface
[mac-address vlan vlan-id] [vlan vlan-id]] [vlan vlan-id]
mac-address
interface interface
vlan vlan-id
EXEC
EXEC Privilege
pre-Version 6.2.1.1
Introduced on E-Series
MAC Accounting information can be accessed using SNMP via the FTOS Monitor MIB. For more
information on enabling SNMP, refer to Chapter 3 of the FTOS Configuration Guide.
Note:
Currently, the FTOS MONITOR MIB does not return the MAC addresses in an
increasing order via SNMP. As a workaround, you can use the -C c option in snmpwalk or
snmpbulkwalk to access the FTOS MONITOR MIB. For example:
% snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise.6027.3.3.3
Figure 30-8. show mac accounting destination Command Example
FTOS-1#sh mac accounting destination interface gigabitethernet 2/1
Destination
Out
00:44:00:00:00:02
00:44:00:00:00:01
00:22:00:00:00:00
00:44:00:00:00:02
00:44:00:00:00:01
FTOS-1#
show mac accounting access-list
(OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format to
display information on that MAC address.
(OPTIONAL) Enter the keyword
slot and port information:
•
For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
(OPTIONAL) Enter the keyword
the MAC address assigned to that VLAN.
Range: 1 to 4094.
Port
VLAN
Packets
Te
11/0
1000
10000
Te
11/0
1000
10000
Te
11/0
1000
10000
Te
11/0
2000
10000
Te
11/0
2000
10000
Display MAC access list configurations and counters (if configured).
interface
followed by the interface type,
followed by the slot/port information.
followed by the slot/port information.
vlan
followed by the VLAN ID to display
Bytes
5120000
5120000
5120000
5120000
5120000
Advertisement
