Advertisement
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
neighbor X:X:X::X password
c e
t
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
766
|
IPv6 Border Gateway Protocol (IPv6 BGP)
threshold
warning-only
threshold = 75
ROUTER BGPV6-ADDRESS FAMILY
Version 8.4.2.1
Introduced on C-Series and S4810.
Version 8.2.1.0
Introduced on E-Series ExaScale
Version 7.4.1.0
Introduced on E-Series TeraScale
If the
neighbor maximum-prefix
the
neighbor maximum-prefix
ipv6 unicast summary
command displays
The neighbor remains down until you enter the
neighbor or the peer group to which the neighbor belongs or you enter
neighbor no shutdown
commands.
show ip bgp ipv6 unicast summary
Enable TCP MD5 Authentication for an IPv6 BGP peer session.
neighbor x:x:x::x password {7 <encrypt-pass> | <clear-pass}
To return to the default setting, use the no neighbor x:x:x::x password command.
encrypt-pass
clear-pass
Disabled.
ROUTER BGPV6-ADDRESS FAMILY
Version 8.4.2.1
Introduced on C-Series and S4810.
Version 8.2.1.0
Introduced on E-Series TeraScale
The TCP session is authentication and hence prevents the data from being compromised.
(OPTIONAL) Enter a number to be used as a percentage of the
maximum
value. When the number of prefixes reaches this percentage
maximum
of the
value, the E-Series software sends a message.
Range: 1 to 100 percent.
Default: 75
(OPTIONAL) Enter the keyword
send a log message when the maximum value is reached. If this
parameter is not set, the router stops peering when the maximum number
of prefixes is reached.
is configured and the neighbor receives more prefixes than allowed by
command configuration, the neighbor goes down and the
(prfxd)
in the State/PfxRcd column for that neighbor.
capture bgp-pdu max-buffer-size
Displays the current BGP configuration.
Enter the encrypted password.
Enter the clear text password.
warning-only
to set the router to
show ip bgp
command for the
neighbor shutdown
and
Advertisement
