Advertisement
Related
copy
Commands
show file
show file-systems
logging coredump
c e
Enable coredump.
Syntax
logging coredump {cp | linecard {number | all} | rps}
Parameters
cp
linecard
rps
Defaults
The kernal coredump is enabled by default for RP 1 and 2 on E-Series. The kernel coredump for CP
and application coredump are disabled on all systems by default.
Command Modes
CONFIGURATION
Command
Version 7.7.1.0
History
Version 6.5.1.0
Version 6.1.1.0
Usage
The Kernel core dump can be large and may take up to 5 to 30 minutes to upload. FTOS does not
Information
overwrite application core dumps so you should delete them as necessary to conserve space on the
flash; if the flash is out of memory, the coredump is aborted. On the S-Series, if the FTP server is not
reachable, the application coredump is aborted. FTOS completes the coredump process and wait until
the upload is complete before rebooting the system.
Related
logging coredump server
Commands
logging coredump server
c e s
Designate a server to upload core dumps.
Syntax
logging coredump server {ipv4-address | ipv6-address} username name password [type]
password
Parameters
{ipv4-address |
ipv6-address}
name
Copy the current configuration to either the startup-configuration file or the
terminal.
Display contents of a text file in the local filesystem.
Display information about the file systems on the system.
Enable coredump for the CP.
Enable coredump for a linecard.
Enable coredump for RP 1 and 2.
Restructured command to accommodate core dumps for CP. Introduced on C-Series and
S-Series
Application coredump naming convention enhanced to include application.
Introduced
Designate a sever to upload kernel core-dumps.
Enter the server IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X).
Enter a username to access the target server.
File Management | 39
Advertisement
