Advertisement
secondary
file-url
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
Version 7.5.1.0
History
E-Series original Command
To display these changes in the show bootvar command output, you must save the running
Usage
Information
configuration to the startup configuration (using the
Related
change bootflash-image
Commands
boot system gateway
boot system gateway
c e
Specify the IP address of the default next-hop gateway for the management subnet.
Syntax
boot system gateway ip-address
Parameters
ip-address
Command Modes
CONFIGURATION
Usage
Saving the address to the startup configuration file preserves the address in NVRAM in case the startup
Information
configuration file is deleted.
Command
Version 7.5.1.0
History
E-Series original Command
Related
change bootflash-image
Commands
cd
c e s
Change to a different working directory.
Syntax
cd directory
rpm0
rpm1
After entering
or
parameters used if the primary operating system boot selection is not available.
To boot from a file:
•
on the internal Flash, enter
ftp://user:password
•
on an FTP server, enter
•
on the external Flash, enter
tftp://hostip/filepath
•
on a TFTP server, enter
Introduced on C-Series
Change the primary, secondary, or default boot image configuration.
Specify the IP address of the default next-hop gateway for the management
subnet.
Enter an IP address in dotted decimal format.
Introduced on C-Series
Change the primary, secondary, or default boot image configuration.
secondary
, enter the keyword
flash://
followed by the filename.
hostip/filepath
@
slot0://
followed by the filename.
copy
command) and reload system.
to configure boot
File Management | 31
Advertisement
