Dell Force10 TeraScale E Series Reference Manual page 912

Defaults
Command Modes
Command
History
Related
Commands
advertise med voice
c e s
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
912 | Link Layer Detection Protocol (LLDP)
DSCP_value
priority-tagged number
unconfigured
CONFIGURATION (conf-lldp)
Version 7.7.1.0
Version 7.6.1.0
debug lldp interface
show lldp neighbors
show lldp neighbors
Configure the system to advertise a dedicated IP telephony handset or other appliances supporting
interactive voice services.
advertise med voice {vlan-id layer2_priority DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med voice {vlan-id layer2_priority DSCP_value} |
{priority-tagged number} command.
vlan-id
layer2_priority
DSCP_value
priority-tagged number
unconfigured
CONFIGURATION (conf-lldp)
Version 7.7.1.0
Version 7.6.1.0
debug lldp interface
show lldp neighbors
show running-config lldp
Enter the DSCP value (C-Series and E-Series only).
Range: 0 to 63
priority-tagged
Enter the keyword
Range: 0 to 7
Introduced on S-Series
Introduced on C-Series and E-Series
Debug LLDP
Display the LLDP neighbors
Display the LLDP running configuration
Enter the VLAN ID.
Range: 1 to 4094
Enter the Layer 2 priority (C-Series and E-Series only).
Range: 0 to 7
Enter the DSCP value (C-Series and E-Series only).
Range: 0 to 63
priority-tagged
Enter the keyword
Range: 0 to 7
Introduced on S-Series
Introduced on C-Series and E-Series
Debug LLDP
Display the LLDP neighbors
Display the LLDP running configuration
followed the Layer 2 priority.
followed the Layer 2 priority.