Advertisement
Parameters
Defaults
Command Modes
Command
History
Usage
Information
436
|
Content Addressable Memory (CAM)
profile
(OPTIONAL) Choose a single CAM profile to display:
•
Enter the keyword
•
Enter the keyword
(dual-CAM) line cards.
•
Enter the keyword
entries for the IPv4 Forwarding Information Base (FIB)
Enter the keyword ipv4-egacl-16k to specify the CAM profile that provides
•
16K entries for egress ACLs.
•
Enter the keyword ipv6-extacl to specify the CAM profile that provides
IPv6 functionality.
•
Enter the keyword l2-ipv4-inacl to specify the CAM profile that
provides 32K entries for ingress ACLs.
•
Enter the keyword
CAM allocations for the IPv6 and IPv4 FIB while allocating more CAM space for the
Ingress and Egress Layer 2 ACL, and IPv4 ACL regions.
•
Enter the keyword
allocations for the IPv4 FIB while allocating CAM space for VRF.
•
Enter the keyword
allocations for the IPv4 and IPv6FIB while allocating CAM space for VRF.
microcode
Choose the microcode to display. Not all microcodes are available to be paired with a
CAM profile.
microcode
•
Enter the keyword
typical deployment.
•
Enter the keyword
that require the same hashing for bi-directional traffic.
•
Enter the keyword
MPLS labels (up to five labels deep).
•
Enter the keyword
•
Enter the keyword
egress IPv4 ACLs.
•
Enter the keyword
•
Enter the keyword
applications.
•
Enter the keyword
alternate to ipv6-extacl that redistributes CAM space from the IPv4FIB to IPv4Flow
and IPv6FIB.
summary
(OPTIONAL) Enter this keyword to view a summary listing of the CAM profile and
microcode on the chassis and all line cards.
None
EXEC Privilege
Version 8.2.1.0
Added support for
Version 7.9.1.0
Added support for VRF protocols.
Version 6.3.1.0
Introduced on E-Series
If the CAM profile has been changed, this command displays the current CAM profile setting in one
column and in the other column displays the CAM profile and the microcode that will be configured
for the chassis and all online line cards after the next reboot.
default
to specify the default CAM profile.
eg-default
to specify the default CAM profile for EG
ipv4-320k
to specify the CAM profile
unified-default
to specify the CAM profile that maintains the
ipv4-vrf
to specify the CAM profile that maintains the CAM
ipv4-v6-vrf
to specify the CAM profile that maintains the CAM
default
to select the microcode that distributes CAM space for a
lag-hash-align to select the microcode for applications
lag-hash-mpls
to select the microcode for hashing based on
ipv6-extacl
to select the microcode for IPv6.
acl-group
to select the microcode for applications that need 16k
ipv4-vrf
to select the microcode for IPv4 VRF applications.
ipv4-v6-vrf
to select the microcode forIPv4 and IPv6 VRF
ipv4-64k-ipv6
to specify the CAM profile that provides an
ipv4-64k-ipv6 profile
that provides 320K
.
Advertisement
