Advertisement
show interfaces phy
c e s
Syntax
Parameters
Command Modes
Command
History
Example
602
|
Interfaces
Display auto-negotiation and link partner information.
show interfaces gigabitethernet slot/port phy
gigabitethernet
EXEC
EXEC Privilege
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Introduced on C-Series and S-Series
Version 6.5.4.0
Introduced on E-Series
Figure 23-36. show interfaces gigabitethernet phy Command Example (Partial)
FTOS#show int gigabitethernet 1/0 phy
Mode Control:
SpeedSelection:
AutoNeg:
Loopback:
PowerDown:
Isolate:
DuplexMode:
Mode Status:
AutoNegComplete:
RemoteFault:
LinkStatus:
JabberDetect:
AutoNegotation Advertise:
100MegFullDplx:
100MegHalfDplx:
10MegFullDplx:
10MegHalfDplx:
Asym Pause:
Sym
Pause:
AutoNegotiation Remote Partner's Ability:
100MegFullDplx:
100MegHalfDplx:
10MegFullDplx:
10MegHalfDplx:
Asym Pause:
Sym
Pause:
AutoNegotiation Expansion:
ParallelDetectionFault:
...
Table 23-8. Lines in show interfaces gigabitethernet Command Example
Line
Mode Control
Mode Status
AutoNegotiation Advertise
gigabitethernet
Enter the keyword
10b
ON
False
False
False
Full
False
False
False
False
True
True
False
True
False
False
False
False
False
False
False
False
False
Description
Indicates if auto negotiation is enabled. If so, indicates the selected speed and
duplex.
Displays auto negotiation fault information. When the interface completes
auto negotiation successfully, the autoNegComplete field and the linkstatus
field read "True."
Displays the control words advertised by the local interface during
negotiation. Duplex is either half or full. Asym- and Sym Pause is the types of
flow control supported by the local interface.
followed by the slot/port information.
Advertisement
