Advertisement
Figure 30-13. Example of Output of show vlan brief
FTOS#show vlan br
VLAN Name
---- -------------------------------- ----
1
2
3
FTOS#
Figure 30-14. Using VLAN Name
FTOS(conf)#interface vlan 222
FTOS(conf-if-vl-222)#name test
FTOS(conf-if-vl-222)#do show vlan name test
Codes: * - Default VLAN, G - GVRP VLANs
Q: U - Untagged, T - Tagged
FTOS(conf-if-vl-222)#
Related
vlan-stack compatible
Commands
interface vlan
tagged
c e s
Add a Layer 2 interface to a VLAN as a tagged interface.
Syntax
tagged interface
To remove a tagged interface from a VLAN, use no tagged interface command.
Parameters
interface
Defaults
All interfaces in Layer 2 mode are untagged.
Command Modes
INTERFACE VLAN
Command
Version 7.6.1.0
History
Version 7.5.1.0
pre-Version 6.1.1.1
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack
NUM
Status
Description
222
Inactive
Enter the following keywords and slot/port or number information:
•
For a 1-Gigabit Ethernet interface, enter the keyword
by the slot/port information.
•
For a Port Channel interface, enter the keyword
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
•
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
Introduced on S-Series
Introduced on C-Series
Introduced on E-Series
STG
MAC Aging IP Address
--------- ------------------
0
1800
0
1800
0
1800
Enable the Stackable VLAN feature on the selected VLAN.
Configure a VLAN.
unassigned
2.2.2.2/24
3.3.3.2/24
Q Ports
U Gi 1/22
GigabitEthernet
followed
port-channel
followed by a
TenGigabitEthernet
Layer 2 | 893
Advertisement
