Advertisement
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
54
|
File Management
linecard number
rpm
repair
booted
file-url
FTOS uses the boot flash image that was packed with it if no URL is specified.
EXEC Privilege
Version 7.7.1.0
Introduced system-image option
Version 7.5.1.0
Introduced on C-Series
E-Series original Command
A system message appears stating the Bootflash upgrade status. Reload the system to boot from the
upgraded boot images.
Once the URL is specified, the same downloaded image can be used for upgrading an individual RPM,
line cards, SFM FPGA, and system-image for cache-boot without specifying the file-url again using
the command upgrade {bootflash-image | bootselector-image | system-image} {all |
linecard linecard-slot | rpm}. After 20 minutes, the cached memory is released and returned for
general use, but the URL is maintained and you do not have to specify it for subsequent upgrades.
upgrade fpga-image
boot system
rpm
Enter the keyword
to upgrade the system image of a selector image
on all processors on the RPM.
Enter this keyword to upgrade a line card newly inserted into an already
upgraded chassis. This option is only available with the
keyword.
Upgrade the bootflash or bootselector image using the currently running
FTOS image.
Enter the following location keywords and information to upgrade using an
FTOS image other than the one currently running:
•
To specify an FTOS image on the internal flash, enter
file-path/filename
.
•
To specify an FTOS image on an FTP server, enter
user:password
hostip/filepath
@
•
To specify an FTOS image on the external flash on the primary RPM,
slot0://file-path/filename
•
To copy a file on a TFTP server, enter
filename
Upgrade the FPGA version in the specified E-Series SFM.
Display configured boot image information
system-image
flash://
ftp://
tftp://hostip/filepath/
Advertisement
