Advertisement
Related
Commands
redundancy reset-counter
e
Syntax
Defaults
Command Modes
Command
History
redundancy sfm standby
c
Syntax
Defaults
Command Modes
Command
History
Command
History
Usage
Information
540
|
High Availability (HA)
show lacp
show redundancy
Reset failover counter and timestamp information displayed in the
redundancy reset-counter
Not configured
EXEC Privilege
Version 8.1.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Introduced on E-Series
Place the SFM in an offline state.
redundancy sfm standby
Place the SFM in an online state using the command no redundancy sfm standby command.
The SFM is online by default.
CONFIGURATION
Version 7.5.1.0
Introduced on C-Series
Version 7.5.1.0
Introduced on C-Series Only
When a secondary RPM with logical SFM is inserted or removed, the system must add or remove the
backplane links to the switch fabric trunk. To avoid traffic disruption, use this command when the
secondary RPM is inserted. When this command is executed, the logical SFM on the standby RPM is
immediately taken offline and the SFM state is set as "standby".
Note:
This command could affect traffic when taking the secondary SFM offline.
Display the lacp configuration
Display the current redundancy configuration.
show redundancy
command output.
Advertisement
