Advertisement
queue backplane multicast
e
Syntax
Parameters
Defaults
Command Modes
Command
History
Example
Related
Commands
962
|
Multicast
Reallocate the amount of bandwidth dedicated to multicast traffic.
queue backplane multicast bandwidth-percentage percentage
percentage
80% of the scheduler weight is for unicast traffic and 20% is for multicast traffic by default.
CONFIGURATION
Version 7.7.1.0
Figure 35-1. queue backplane multicast Command Example
FTOS(conf)#queue backplane multicast bandwidth-percent 30
FTOS(conf)#exit
FTOS#00:14:04: %RPM0-P:CP %SYS-5-CONFIG_I: Configured from console by
console
show run | grep bandwidth
queue backplane multicast bandwidth-percent 30
FTOS#
show queue backplane
multicast
Enter the percentage of backplane bandwidth to be dedicated to multicast
traffic.
Range: 5-95
Introduced on E-Series
Display the backplane bandwidth configuration about how much bandwidth is
dedicated to multicast versus unicast.
Advertisement
