Advertisement
ip route bfd
c e
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
isis bfd all-neighbors
e
Syntax
Parameters
308
|
Bidirectional Forwarding Detection (BFD)
Enable BFD for all neighbors configured through static routes.
ip route bfd [interval
interval
interval milliseconds
min_rx milliseconds
multiplier value
role [active | passive]
See Parameters
CONFIGURATION
Version 8.2.1.0
Introduced on E-Series ExaScale
Version 7.6.1.0
Introduced on C-Series
Version 7.4.1.0
Introduced on E-Series
show bfd neighbors
Enable BFD on all IS-IS neighbors discovered on an interface.
isis bfd all-neighbors [disable | [interval
| passive}]]
disable
interval milliseconds
min_rx
multiplier
min_rx
(OPTIONAL) Enter this keyword to specify non-default BFD session
parameters beginning with the transmission interval.
Range:50-1000
Default:100
Enter this keyword to specify the minimum rate at which the local system
would like to receive control packets from the remote system.
Range:50-100
Default:100
Enter this keyword to specify the number of packets that must be missed in
order to declare a session down.
Range:3-50
Default:3
Enter the role that the local system assumes:
•
Active—The active system initiates the BFD session. Both systems can
be active for the same session.
•
Passive—The passive system does not initiate a session. It only responds
to a request for session initialization from the active system.
Default: Active
Display BFD neighbor information on all interfaces or a specified interface.
min_rx
interval
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter this keyword to specify non-default BFD session
parameters beginning with the transmission interval.
Range:50-1000
Default:100
role {active | passive}]
value
multiplier
min_rx
value
disable
to disable BFD on this interface.
role {active
Advertisement
