Advertisement
Command
Version 7.8.1.0
History
Version 7.7.1.0
neighbor advertisement-start
c e s
Set the minimum interval before starting to send BGP routing updates.
Syntax
neighbor {ip-address} advertisement-start seconds
To return to the default value, use the no neighbor {ip-address} advertisement-start command.
Parameters
ip-address
seconds
Defaults
none
Command Modes
ROUTER BGP
Command
Version 7.8.1.0
History
Version 7.7.1.0
neighbor allowas-in
c e s
Set the number of times an AS number can occur in the AS path
Syntax
neighbor {ip-address | peer-group-name} allowas-in number
To return to the default value, use the no neighbor {ip-address | peer-group-name} allowas-in
command.
Parameters
ip-address
peer-group-name
number
Defaults
Not configured.
Command Modes
ROUTER BGP
Related
bgp four-octet-as-support
Commands
Command
Version 7.8.1.0
History
Version 7.7.1.0
Introduced support on S-Series
Introduced support on C-Series
Enter the IP address of the neighbor in dotted decimal format.
Enter a number as the time interval, in seconds, before BGP route updates are
sent.
Range: 0 to 3600 seconds.
Introduced support on S-Series
Introduced support on C-Series
Enter the IP address of the neighbor in dotted decimal format.
Enter the name of the peer group to set the advertisement interval for all routers
in the peer group.
Enter a number of times to allow this neighbor ID to use the AS path.
Range: 1 to 10.
Enable 4-Byte support for the BGP process.
Introduced support on S-Series
Introduced on C-Series and E-Series
Border Gateway Protocol IPv4 (BGPv4) | 343
Advertisement
