Advertisement
Virtual LAN (VLAN) Commands
The following commands configure and monitor Virtual LANs (VLANs). VLANs are a virtual
interface and use many of the same commands as physical interfaces.
You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP,
TFTP, ACLs and SNMP are not supported on a VLAN.
Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the VRRP state of a
VLAN interface may continually switch between Master and Backup.
•
•
•
•
•
•
•
•
•
•
See also
Interfaces.
description
c e s
Add a description about the selected VLAN.
Syntax
description description
To remove the description from the VLAN, use the no description command.
Parameters
description
Defaults
No default behavior or values
Command Modes
INTERFACE VLAN
Command
Version 7.6.1.0
History
Version 6.3.1.0
Related
show vlan
Commands
description
default vlan-id
default-vlan disable
enable vlan-counters
name
show config
show vlan
tagged
track ip
untagged
VLAN Stacking
and see VLAN-related commands, such as
Enter a text string description to identify the VLAN (80 characters maximum).
Introduced on C-Series and S-Series
Introduced on E-Series
Display VLAN configuration.
portmode
hybrid, in
Chapter 23,
Layer 2 | 887
Advertisement
