Advertisement
Command
History
debug ip bgp dampening
c e
s
t
Syntax
Parameters
Command Modes
Command
History
debug ip bgp ipv4 multicast soft-reconfiguration
c e s
Syntax
Parameters
Defaults
Command Modes
Usage
Information
398
|
Border Gateway Protocol IPv4 (BGPv4)
Version 8.4.1.0
Added BGP Soft Reconfiguration support for IPv4 unicast and IPv6 routes
Version 7.8.1.0
Introduced support on S-Series
Version 7.7.1.0
Introduced support on C-Series
Version 7.2.1.0
Introduced
View information on routes being dampened.
debug ip bgp ipv4 multicast dampening
To disable debugging, enter no debug ip bgp ipv4 multicast dampening
dampening
EXEC Privilege
Version 7.8.1.0
Introduced support on S-Series
Version 7.7.1.0
Introduced support on C-Series
Version 7.6.1.0
Introduced IPv6 MGBP support for E-Series
Enable soft-reconfiguration debugging for IPv4 multicast routes.
debug ip bgp [ipv4-address | ipv6-address | peer-group-name] ipv4 multicast
soft-reconfiguration
To disable debugging, use the no debug ip bgp [ipv4-address | ipv6-address |
peer-group-name] ipv4 multicast soft-reconfiguration command.
ipv4-address |
Enter the IP address of the neighbor on which you want to enable
soft-reconfiguration debugging.
ipv6-address
peer-group-name
Enter the name of the peer group on which you want to enable soft-reconfiguration
debugging.
ipv4 multicast
Debug soft reconfiguration for IPv4 multicast routes.
Disabled
EXEC Privilege
This command turns on BGP soft-reconfiguration inbound debugging for IPv4 multicast routes. If no
neighbor is specified, debug is turned on for all neighbors.
dampening
Enter the keyword
information.
to clear route flap dampening
Advertisement
