Dell Force10 TeraScale E Series Reference Manual page 442

cam ipv4flow (EXEC Privilege)
e
t
Syntax
Command Modes
Command
History
cam-ipv4flow (CONFIGURATION)
e
t
Syntax
Parameters
Defaults
Command Modes
442 | Content Addressable Memory (CAM)
Configure the amount of CAM space in IPv4flow sub-regions.
This command is deprecated as of FTOS 8.3.1.0
cam ipv4flow {chassis all | linecard number} {default | acl value multicast-fib value pbr
value qos value system-flow value trace-list value}
EXEC Privilege
Version 8.3.1.0 COMMAND DEPRECATED
Version 6.3.1.0 Introduced on E-Series
Configure the amount of CAM space in IPv4flow sub-regions.
cam-ipv4flow {default | multicast-fib value pbr value qos value system-flow value
trace-list value}
default
multicast-fib value
pbr value
qos value
system-flow value
trace-list value
See Parameters
CONFIGURATION
default
Enter the keyword to reset the IPV4Flow CAM region to its default
setting.
multicast-fib
Enter the keyword
multicast FIB sub-region in 1K increments.
Range: 1 to 32 KB
Default: 9 KB
pbr
Enter the keyword followed by the number of entries for the PBR
sub-region in 1K increments.
Range: 1 to 32 KB
Default: 1 KB
qos
Enter the keyword followed by the number of entries for the QoS
sub-region in 1K increments.
Range: 1 to 32 KB
Default: 8 KB
system-flow
Enter the keyword
system-flow sub-region in 1K increments.
Range: 4 to 32 KB
Default: 5 KB
trace-list
Enter the keyword
trace-list sub-region in 1K increments.
Range: 1 to 32 KB
Default: 1 KB
followed by the number of entries for the
followed by the number of entries for the
followed by the number of entries for the