Advertisement
Related
capture bgp-pdu max-buffer-size
Commands
show capture bgp-pdu neighbor
Command
Version 7.8.1.0
History
Version 7.7.1.0
Version 7.5.1.0
capture bgp-pdu max-buffer-size
c e s
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000
Defaults
40960000 bytes.
Command Modes
EXEC Privilege
Related
capture bgp-pdu neighbor
Commands
capture bgp-pdu neighbor (ipv6)
show capture bgp-pdu neighbor
Command
Version 7.8.1.0
History
Version 7.7.1.0
Version 7.5.1.0
clear ip bgp ipv4 unicast soft
c e s
Clear and reapply policies for IPv4 routes without resetting the TCP connection; that is, perform BGP
soft reconfiguration.
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-neighbor-addr | peer-group name}
[ipv4 unicast] soft [in | out]
Parameters
*
as-number
ipv4-neighbor-addr |
ipv6-neighbor-addr
peer-group name
ipv4 unicast
Introduced support on S-Series
Introduced support on C-Series
Introduced
Enter a size for the capture buffer.
Enable capture of an IPv4 BGP neighbor packet.
Enable capture of an IPv6 BGP neighbor packet.
Display BGP packet capture information for an IPv6 address on the
E-Series.
Introduced support on S-Series
Introduced support on C-Series
Introduced
Clear and reapply policies for all BGP sessions.
Clear and reapply policies for all neighbors belonging to the AS.
Range: 0-65535 (2-Byte)
1-4294967295 (4-Byte)
0.1-65535.65535 (Dotted format)
Clear and reapply policies for a neighbor.
Clear and reapply policies for all BGP routers in the specified peer group.
Clear and reapply policies for all IPv4 unicast routes.
Specify a size for the capture buffer.
Display BGP packet capture information
or
or
Border Gateway Protocol IPv4 (BGPv4) | 333
Advertisement
