Advertisement
Command
Version 7.5.1.0
History
Version 6.3.1.0
Usage
How a metric value assigned to a redistributed route is advertised depends on how on the configuration
Information
of the
in the
will be 63. If the
ospf
router isis
e
Allows you to enable the IS-IS routing protocol and to specify an IP IS-IS process.
Syntax
router isis [tag]
To disable IS-IS routing, enter no router isis [tag].
Parameters
tag
Defaults
Not configured.
Command Modes
ROUTER ISIS
Usage
You must configure a network entity title (the
Information
system ID.
You must enable routing on one or more interfaces to establish adjacencies and establish dynamic
routing.
Only one IS-IS routing process can be configured to perform Level 2 routing. A level-1-2 designation
performs Level 1 and Level 2 routing at the same time.
Related
ip router isis
Commands
net
is-type
set-overload-bit
e
Configure the router to set the overload bit in its non-pseudonode LSPs. This prevents other routers
from using it as an intermediate hop in their shortest path first (SPF) calculations.
Syntax
set-overload-bit
To return to the default values, enter no set-overload-bit.
Defaults
Not set.
Introduced IPv6 ISIS support
Introduced
metric-style
command. If the
redistribute ospf
command is set to a number higher than 63, the metric value advertised in LSPs
metric-style
command is set for wide mode, an the metric value in the
command is advertised.
(OPTIONAL) This is a unique name for a routing process. A null tag is assumed if the tag option
is not specified. The tag name must be unique for all IP router processes for a given router.
Configure IS-IS routing processes for IP on interfaces and attach an area designator
to the routing process.
Configure an IS-IS network entity title (NET) for a routing process.
Assign a type for a given area.
metric-style
command is set for narrow mode and the metric value
net
command) to specify the area address and the router
Intermediate System to Intermediate System (IS-IS) | 851
redistribute
Advertisement
