Siemens Simovert Masterdrives Compendium page 503

03.2010
8.4.2.2 Mounting positions of the CBC in Compact and chassis units of function
classes MC (CUPM, CUMC) and VC (CUVC)
Slots
NOTE
Position of the slots
Siemens AG 6SE7087-6QX70 (Version AL)
SIMOVERT MASTERDRIVES
In the electronics box of the compact-type and chassis-type converters
and inverters, there are up to six slots available for installing an optional
board. The slots are marked with the letters A to G. Slot B is not
present in these types of unit; it is used in Compact PLUS units.
If you wish to use Slots D to G, you must first mount the LBA (Local
Bus Adapter) and the corresponding adapter board (6SX7010-0KA00).
In principle, you can operate the optional CBC board (Communication
Board CAN) in any slot. Please bear in mind, however, that an encoder
board always needs Slot C and that the LBA requires the slots to be
used in a particular sequence.
The CBC can be mounted on the adapter board in both slots, i.e. TOP
and/or BOTTOM.
The slots are located at the following positions:
♦ Slot A
CU board
♦ Slot C
CU board
♦ Slot D
Adaptation board in mount. pos. 2
♦ Slot E Adaptation board in mount. pos. 2
♦ Slot F
Adaptation board in mount. pos. 3
♦ Slot G
Adaptation board in mount. pos. 3
Adaption board
Fig. 8.4-5 Adaptation board with optional boards and position of the slots for
Compact units and chassis-type units
Compendium Motion Control
Electronics box
top
Optional board
bottom
Communication / CBC
Top
Bottom
Top
Bottom
Top
Bottom
Mounting pos. 1
Mounting pos. 3
Mounting pos. 2
8.4-5