Siemens Simovert Masterdrives Compendium page 174

08.2012
Frequency
converter, chassis-
type AC-AC units
Inverter, chassis-
type DC-AC units
Siemens AG 6SE7087-6QX70 (Version AN)
SIMOVERT MASTERDRIVES
Order number
6SE7031-0EE70 92.0
6SE7031-2EF70 124.0
6SE7031-8EF70 186.0
6SE7032-1EG70 210.0
6SE7032-6EG70 260.0
6SE7033-2EG70 315.0
6SE7033-7EG70 370.0
6SE7035-1EK70 510.0
6SE7036-0EK70 590.0
6SE7037-0EK70 690.0
Order number
6SE7031-0TE70 92.0
6SE7031-2TF70 124.0
6SE7031-8TF70 186.0
6SE7032-1TG70 210.0
6SE7032-6TG70 260.0
6SE7033-2TG70 315.0
6SE7033-7TG70 370.0
6SE7035-1TJ70 510.0
6SE7036-0TJ70 590.0
6SE7037-0TJ70 690.0
6SE7038-6TK70 860.0
6SE7041-1TK70 1100.0
6SE7041-3TL70 1300.0
1)
theoretical rated output current at 3 kHz pulse frequency; rated output
current can only be achieved if the Power Extension PIN is entered.
2)
rated output current at 5 kHz pulse frequency; the permissible rated output
current will be reduced further at higher pulse frequencies (see technical
data, derating)
3)
This device is a chassis unit (from type J). The overload over 30 s is
therefore limited to 1.36 x the rated output current at 5 kHz.
This unit is a so-called chassis unit and can only be operated up to a
4)
maximum pulse frequency of 2.7 kHz. The overload for 30 s is limited to
1.36 times the rated output current.
Compendium Motion Control
In [A] PWE
74
82
1) 2)
155.0 98
1) 2)
175.0 102
1) 2)
218.0 108
1) 2)
262.0 112
1) 2)
308.0 116
1) 2) 3)
423.0 147
1) 2) 3)
491.0 151
4)
164
In [A] PWE
75
83
1) 2)
155.0 99
1) 2)
175.0 103
1) 2)
218.0 109
1) 2)
262.0 113
1) 2)
308.0 117
1) 2) 3)
423.0 120
1) 2) 3)
491.0 123
4)
163
4)
127
4)
135
4)
154
Parameterizing Steps
6-9