Siemens Simovert Masterdrives Compendium page 357

09.2008
Special features /
restrictions
Siemens AG 6SE7087-6QX70 (Version AK)
SIMOVERT MASTERDRIVES
MASTERDRIVES MC with parameter model to PROFIdrive profile
version 2. In combination with the CBP2, DPV1 can be utilized in
accordance with PROFIdrive profile version 3.
DPV1 client (V3)
PKW client (V2)
♦ Access operations to simple parameters (i.e. parameters without
indices) must be identified by "No. of elements" = 0.
♦ Changing the sub-areas of an array is not supported by the CBP2, i.e.
it is possible to transfer a write task either for one index or for all
indices. To alter a complete parameter array, the number of values
has to be equal to or greater than the size of the array.
♦ The editing of texts or descriptions is not supported.
♦ Reading of several or all texts from a text array via a parameter task
is not supported, i.e. only one text from one text array (subindex) can
be read with one parameter task.
Compendium Motion Control
[0..n-1]
[1..n]
Drive
(V2)
[1..n]
Communication / PROFIBUS
+1
8.2-27