Siemens Simovert Masterdrives Compendium page 255

Functions
7.2.3.5 Application example
Qualified personnel
NOTE
Standard
applications
NOTE
7-46
Definitions and warnings
within the scope of the documentation are individuals who are familiar
with the erection, installation, commissioning, operation and
maintenance of the SIMOVERT MASTERDRIVES product and who
have the appropriate qualifications to perform their activities, such as:
♦ trained and authorized to energize, de-energize, ground and tag
circuits and equipment in accordance with established safety
procedures.
♦ trained in the proper care and use of protective equipment in
accordance with established safety procedures.
♦ trained in rendering first aid.
This document does not contain any explicit warnings. However,
reference is made to the warnings contained in the operating
instructions for the relevant product in the MASTERDRIVES range.
The application examples are provided free of charge. They may be
copied, modified and used and passed on to third parties. They may
only be passed on in a complete and unmodified state together with all
patent rights notices. The commercial distribution to third parties (e.g.
as shareware or freeware) is only permitted with the prior written
permission of Siemens AG.
As the application examples are provided to you free of charge, the
authors and copyright holders are unable to entertain any warranty
claims. You use them at your own risk. The authors and copyright
holders shall only be liable for their premeditated actions and gross
negligence. All other claims are excluded. In particular the authors and
copyright holders accept no liability for any defects or consequential
damages. Please let us know if you find any errors in the application
examples.
Basic applications in the form of scripts including full
documentation
are available, e.g.:
• full functionality of the basic positioner through PROFIBUS interface;
• basic positioner through terminal strip interface,
• etc..
Standard applications are available including parameter assignment
and documentation. These can be obtained from your regional
SIEMENS AG office and are available from the Application Center for
Production Machines.
6SE7087-6QX70 (Version AK)
Compendium Motion Control
09.2008
Siemens AG
SIMOVERT MASTERDRIVES