Siemens Simovert Masterdrives Compendium page 517

03.2010
Example of
parameter identifier
Siemens AG 6SE7087-6QX70 (Version AL)
SIMOVERT MASTERDRIVES
Reply ID
0 No reply
1 Transfer parameter value in the case of non-indexed
parameters (word)
2 Transfer parameter value in the case of non-indexed
parameters (double word)
Transfer descriptive element 1
3
4 Transfer parameter value (array, word) in the case of indexed
parameters 2
5 Transfer parameter value (array, double word) in the case of
indexed parameters 2
6 Transfer number of array elements
7 Task cannot be executed (with error number)
8 No operator change rights for the PKW interface
9 Parameter change report (word) (not with the CBC)
10 Parameter change report (double word) (not with the CBC)
Parameter change report (array, word) 2 (not with the CBC)
11
Parameter change report (array, double word) 2 (not with the
12
CBC)
13 Reserved
14 Reserved
15 Transfer text (not with the CBC)
1
The required element of the parameter description is specified in IND (2nd word)
2
The required element of the indexed parameter is specified in IND (2nd word)
Table 8.4-6 Reply ID (converter -> master)
Source for the ON/OFF command (control word 1, bit 0): P554 (=22A
Hex)
Change parameter value (array, word) and store in the EEPROM.
1st word
Bit No.: 15
AK
Binary value 1 1
HEX value C
Bits 12 to 15:
Value = 12 (= "C" Hex); change parameter value (array, word)
and store in the EEPROM
Bits 0 to 11:
Value = 554 (= "22A" Hex); parameter number without a set
parameter change report bit
Compendium Motion Control
Meaning
Parameter ID (PKE)
12 11 10
SPM
Byte 1
0 0 0 0 1 0
2
Communication / CBC
PNU
Byte 0
0 0 1 0 1 0 1 0
2 A
8.4-19
0