Siemens Simovert Masterdrives Compendium page 999

1 2
Position sensing
Configuration of position sensing for motor encoder in slot C
P183 Configuration of position sensing
Position of
Value Meaning
P183.01
Encoder sensing
xxx0 - No position sensing with motor encoder in
slot C
xxx1 - Release position sensing with resolver
or encoder
xxx2 - Release position sensing with multiturn
encoder
Reference point detection mode
xx0x - No reference point detection
xx1x - At the right of the rough pulse
The first rotor zero position at the right of
the rough pulse sets position sensing to
the setting value
xx2x - The first rotor zero position at the left of
rough pulse sets position sensing to the
setting value
x0xx - Counting direction the same as direction
of motor rotation
x1xx - Counting direction opposite to direction
of motor rotation
0xxx - Input of position feedback scaling factor
with components left and right of decimal
1xxx - Input of position feedback scaling factor
as numerator/denominator
P183.02
xxx0 - Zero offset encoder
Zero offset correction OFF
xxx1 - Zero offset correction ON
xx0x - Reference point detection
Set position to setting value
xx1x - Reference point detection
Only measure position
3 4 5 6
V2.5 Function diagram
fp_mc_331_e.vsd
MASTERDRIVES MC
08.10.01
7 8
- 331 -