Siemens SIMOTICS CONNECT 400 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Control Unit
  5. SIMOTICS CONNECT 400
  6. Operating instructions manual

Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Connectivity module
Hide thumbs Also See for SIMOTICS CONNECT 400:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
Connectivity module
SIMOTICS CONNECT 400
Edition
05/2020
www.siemens.com/digital-motor

Advertisement

Table of Contents
loading

Related Manuals for Siemens SIMOTICS CONNECT 400

Summary of Contents for Siemens SIMOTICS CONNECT 400

  • Page 1 Operating Instructions Connectivity module SIMOTICS CONNECT 400 Edition 05/2020 www.siemens.com/digital-motor...
  • Page 3 Introduction Safety instructions Description Preparations for use SIMOTICS CONNECT 400 Mounting and installation Commissioning Operating Instructions Operation Maintenance Disposal Further information SIMOTICS CONNECT 400 V0.3.0.390 SIDRIVE IQ Config V1.1.0 SIDRIVE IQ Fleet V1.6 05/2020 A5E50161952A AA...
  • Page 4 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 5: Table Of Contents

    Safety instructions ............................7 General safety instructions.......................7 Qualified personnel ........................8 Security information .........................9 Description..............................11 SIDRIVE IQ Fleet ........................11 "SIMOTICS CONNECT 400" connectivity module ..............13 Preparations for use ...........................15 Visual inspection ........................15 Shipping and storage conditions ....................16 Requirements.........................17 Mounting and installation..........................19 Mounting the connectivity module..................20 Installing the mounting bracket ....................22...
  • Page 6 Changing the attachment position of the mounting bracket ..........65 Disposal..............................67 Disposing of the connectivity module..................68 Disposing of the battery ......................69 Further information .............................71 10.1 Product information ........................71 10.2 Product support........................72 10.3 Technical data........................74 10.4 Directives and standards......................76 Index................................79 SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 7: Introduction

    The note provides you with additional information about the product itself, handling the product - and the relevant documentation. 1.1.2 Text references References to other texts always refer to the beginning of the chapter. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 8: Naming Convention

    Introduction 1.2 Naming convention Naming convention In this documentation, the generic term "Connectivity module" is used for the "SIMOTICS CONNECT 400" product. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 9: Safety Instructions

    ● Do not connect the battery with the incorrect polarity. ● Do not heat up the battery to over 100 °C. ● Protect the battery from direct solar radiation, humidity and condensation. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 10: Qualified Personnel

    ● Through appropriate training and experience, they are able to recognize and avoid risks and potential dangers in their particular field of activity. ● Those responsible have instructed them to carry out the work. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 11: Security Information

    (https://www.siemens.com/industrialsecurity). Special security notes for SC400 ● Make sure that the Bluetooth range of SIMOTICS CONNECT 400 does not extend outside of the company site (approx. 5-10 meters). ● Make sure that the WLAN is used with awareness of security issues. This includes using the WPA2 security protocol.
  • Page 12 Safety instructions 2.3 Security information SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 13: Description

    SIDRIVE IQ Fleet SIMOTICS CONNECT 400 connects drive train components with the cloud-based analytics of the SIDRIVE IQ Fleet MindSphere application. This enables you to improve the productivity, reliability, and service options of the drive train component.
  • Page 14 Description 3.1 SIDRIVE IQ Fleet Further information You will find further information on SIDRIVE IQ Fleet in the "SIDRIVE IQ Fleet" (https:// support.industry.siemens.com/cs/products?dtp=Manual&mfn=ps&pnid=25522&lc=en-WW) operating instructions. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 15: Simotics Connect 400" Connectivity Module

    The captured motor data are transmitted to SIDRIVE IQ Fleet via a WLAN interface and analyzed. Note The SIMOTICS CONNECT 400 connectivity module can be used in combination with rib- cooled low-voltage induction motors (see Technical specifications (Page 74)). Components The connectivity module encompasses the following components: ●...
  • Page 16 Description 3.2 "SIMOTICS CONNECT 400" connectivity module The Connectivity Kit contains the following components in addition to the connectivity module: ● Metal bracket for mounting on the motor housing ● Fastening screws Data security The data are backed up using the following mechanisms: ●...

  • Page 17: Preparations For Use

    Preparations for use Visual inspection After mounting the motor, visually inspect the connectivity module for any damage. In case of damage, please contact Product Support (Page 72). SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 18: Shipping And Storage Conditions

    Do not damage the connectivity module while the motor is being transported, stored and operated. It is not permissible that the connectivity module is subject to mechanical loads and stress. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 19: Requirements

    The SIMOTICS CONNECT 400 connectivity module does not support WLAN authentication protocols according to IEEE 802.1X. Ports that are used Release the following ports used by SIMOTICS CONNECT 400 to allow an Internet connection to be established: ● Secure data exchange with SIDRIVE IQ Fleet: TCP port 443 ●...
  • Page 20 Preparations for use 4.3 Requirements SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 21: Mounting And Installation

    Mounting and installation NOTICE SIMOTICS CONNECT 400 housing with an IP54 degree of protection If the ambient conditions according to IP54 cannot be ensured at the installation location – or if a higher degree of protection is required – then the user must apply additional measures to ensure safe and reliable operation.

  • Page 22: Mounting The Connectivity Module

    The battery is not contacted in the delivered condition. Mounting elements The following figures provide an overview of the relevant mounting elements of the connectivity module in the closed and open condition: ① Front cover ② Cover fastening screws SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 23 The LED display of the connectivity module lights up for approx. 20 to 30 seconds for a battery test. 7. Put the front cover back in position. Ensure that the cover fits precisely. 8. Tighten the 2 central fastening screws at the front cover by hand. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 24: Installing The Mounting Bracket

    Short arm of the mounting bracket: Inner side for gluing to the motor cooling ribs over the full surface area ② Thread for the fastening screws of the connectivity module ③ Long arm of the mounting bracket: Surface for attaching the connectivity module using screws ④ Thermally conducting contact SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 25 2. Choose the position for the connectivity module on the motor. The following figures show examples of the position for the connectivity module on the motor. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 26 6. Allow the adhesive applied to the mounting bracket to dry. Carefully comply with the usage instructions provided on the adhesive package. 7. Allow the adhesive to completely dry. Further information ● SIMOTICS CONNECT 400 Connectivity Kit (https:// support.industry.siemens.com/cs/de/en/view/109774000) Installation Instruction ● Video tutorial How to mount SIMOTICS Connect (https://www.youtube.com/watch?

  • Page 27: Commissioning

    ● The mobile device has an Internet connection via WLAN or GSM/LTE ● There is a WLAN access point to connect the connectivity module to the Internet. ● You have valid access data for SIDRIVE IQ Fleet. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 28: Installing The "Sidrive Iq Config" Application

    6.2 Installing the "SIDRIVE IQ Config" application Installing the "SIDRIVE IQ Config" application 1. Open the Google Play Store. 2. Install the Siemens "SIDRIVE IQ Config" application. The "SIDRIVE IQ Config" application requires authorization to access the following: – Bluetooth interface –...

  • Page 29: Establishing The Connection To The Connectivity Module

    Length limitations of the BLE name The BLE name is used to simply identify the device via Bluetooth. The length of the name is restricted to 7 characters. Do not use any special characters. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 30 ⑥ Bluetooth interface signal strength display ⑦ WLAN configuration status of the connectivity module: ● "Green" status: WLAN configured and operating correctly ● "Red" status: WLAN not configured or has a fault SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 31 ⑫ Status of the connectivity module Procedure 1. Open the "SIDRIVE IQ Config" application. 2. Open the overview page. 3. Select an asset from the "Visible" tab. 4. Tap on "Connect". SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 32: Log In With The Connectivity Module

    Caution: Not the serial number of the motor! After logging in for the first time, change the user name and the password of the "SIDRIVE IQ Config" application in menu "Settings > User". SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 33 2. Enter the user name and password. Make sure that no blank is inserted at the end of your entry. 3. Tap on "Send" to confirm the data that you have entered. The data are transferred. You now have full access to all menus and functions of the connectivity module. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 34: Making The Necessary System Settings

    ● NTP server (time server): Optionally, you can set another NTP server, e.g. a server within your own network. Procedure 1. Select the "Settings" menu. 2. Select the "System" submenu. 3. If necessary, set another "Time server (URL)". SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 35 Manually select the country from the list. 5. Confirm your changes by tapping on "Send". Note Country code Set the country code and confirm the data that you have entered with the "Send" button! SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 36: Setting Up A Wlan Connection

    6.6 Setting up a WLAN connection Setting up a WLAN connection Supported WLAN networks The current version of the SIMOTICS CONNECT 400 connectivity module does not support proxy server configuration. The connectivity module encrypts your data according to security standard WPA2. For data transfer, the connectivity module supports WLAN connections with a frequency of 2.4 GHz and...
  • Page 37 A list of all of the detected WLAN networks is displayed in the selection menu. 4. Enter the WLAN password. The WLAN password must not exceed a maximum length of 32 characters. 5. Confirm your entries by tapping on "Send". SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 38: Onboarding Process Using The "Sidrive Iq Config" Application

    Initiating the onboarding process Requirement You have logged onto the connectivity module (Page 30). Procedure 1. Select menu "SIMOTICS CONNECT" with the most important basic functions. 2. In the "Onboarding" entry, tap on "Execute". SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 39: Assigning The Motor To The Digital Twin

    Scan the motor data matrix code by tapping on Note Motor assignment by scanning the data matrix code is only possible if the Siemens motor has been provided with a 2D code. ● If there is no data set for your motor from the digital twin, e.g. for legacy motors before 2011 or for motors of other manufacturers, you can create a new motor data set manually for setup (see Chapter Onboarding process - creating a new motor data set (Page 41)).
  • Page 40 "Tenant Name" field and entering the tenant name. The length is limited to 8 characters. If you have received a special URL from Siemens, tap on and hold the field "Tenant name" until the display switches to the URL. You can change the onboarding URL as required.

  • Page 41: Logging In To Mindsphere

    Executing the onboarding process Note Settings cannot be subsequently changed Carefully select the following settings. Once selected, you cannot change the settings. Repeat the onboarding process if you have selected an incorrect setting. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 42 – If the motor is found in the motor database by a combination of the serial number and the product article number, a dialog box for selecting the mode of operation opens. Follow the instructions in Chapter Completing the onboarding process (Page 48). SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 43: Onboarding Process - Creating New Motor Data Set

    If the motor is not found in the motor database by a combination of the serial number and the product article number, you will have to enter the motor data yourself and save it in the database. This applies both to Siemens motors and to motors of other manufacturers. Note Settings cannot be modified subsequently Carefully select the following settings.
  • Page 44 Commissioning 6.7 Onboarding process using the "SIDRIVE IQ Config" application Example Creation of a new motor data set is explained based on the following rating plate. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 45 Mindsphere application "SIDRIVE IQ Fleet". Note Mandatory fields The input fields marked "*" are mandatory fields. Note Text color in input fields black = predefined values can be overwritten gray = expected input format SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 46 Commissioning 6.7 Onboarding process using the "SIDRIVE IQ Config" application SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 47 Here, you can enter data for the current, speed, efficiency and power factor. Gaps in the data are permitted, however: the more data you enter, the more accurately you will be able to determine the operating point. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 48 Commissioning 6.7 Onboarding process using the "SIDRIVE IQ Config" application Note Shaft height If the shaft height is not stated on the rating plate, you must measure the shaft height. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 49 ● Cooling method according to IEC60034-6 2. Check the data entered and confirm with the "Send" button. 3. Follow the instructions in Chapter Completing the onboarding process via the "SIDRIVE IQ Config" application (Page 48). SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 50: Terminating The Onboarding Process

    2. If there are several parameter sets in the rated motor data, select the parameter set that corresponds to the connection conditions for your particular motor. A dialog box to select the application opens. 3. Select the application. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 51 OFF state. Only after calibration are accurate data displayed in SIDRIVE IQ Fleet: ● Value "0": Motor off (OFF), sensor calibrated ● Value "1": Motor state not defined, sensor not calibrated ● Value "3": Motor on (RUN), sensor calibrated SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 52 Commissioning 6.7 Onboarding process using the "SIDRIVE IQ Config" application SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 53: Operation

    2. Open the overview page. 3. Select an asset from the "Visible" tab. 4. Tap on the motor symbol in the list entry. The connectivity module LED flashes. The firmware version is read out and displayed. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 54: Changing Measurement And Synchronization Intervals

    Note Effects that influence the battery life Shorter intervals result in a shorter battery life. Procedure 1. Select the "Settings" menu. 2. Select the "Sensor values" submenu. 3. Change the measurement interval. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 55 Operation 7.2 Changing measurement and synchronization intervals 4. Change the synchronization interval. 5. Confirm your changes by tapping on "Send". The "Calculated remaining battery life" is updated. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 56: Changing The User Data Of The Connectivity Module

    – The following special characters are permitted: Hyphens (-) and underscores (_) are allowed. 5. Enter the new password again in the "Password (repeat)" field. 6. Confirm your changes by tapping on "Send". The user data are changed. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 57: Adapting The Location Settings

    There is a WLAN access point (Page 17)to connect the connectivity module to the Internet. Procedure 1. Select the "Settings" menu. 2. Select the "System" submenu. The longitude and latitude degrees are displayed as decimal degrees for the current location. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 58 Operation 7.4 Adapting the location settings 3. Change the values. 4. Confirm your changes by tapping on "Send". The location settings are changed. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 59: Maintenance

    Update the firmware using the "SIDRIVE IQ Config" application. Note You will find the latest firmware version at Siemens Industry Online Support (SIOS) (https:// support.industry.siemens.com/cs/de/en/ps/25522/dl). When you log on to SIOS, you can include the URL in your list of Favorites and be informed about available firmware updates in a newsletter.
  • Page 60 – Load from a file located on your mobile device – Via an Internet address (URL) The firmware is provided by Siemens as a file in ".bin" format. 7. Tap on the "Start" button. A progress bar is displayed while the firmware file is being transferred.
  • Page 61 The connectivity module automatically restarts after the firmware has been successfully updated. The Bluetooth connection to the mobile device is reset. In rare cases, an error message may be displayed on the mobile device: for example, "BLE error". SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 62: Basic Functions

    SIDRIVE IQ Fleet is no longer possible. To transfer data, start a new on‐ boarding process. Offboarding is the precondition for a new onboarding process to SIDRIVE IQ Fleet. Battery replacement Sets the battery status display to 100% after battery replacement. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 63 Factory settings Resets the connectivity module to the factory settings. The user credentials are reset to the factory settings. All of the saved motor data and onboard information are lost. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 64: Replacing The Connectivity Module

    9. Put the front cover back in position. Ensure that the cover fits precisely. 10.Tighten the 2 central fastening screws at the front cover by hand. 11.Reconfigure the connectivity module (Page 25). SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 65: Replace The Battery

    When a battery is changed, device configuration data are kept in the retentive memory. The following data are lost: ● Measurement data after the last transmission to SIDRIVE IQ Fleet ● The associated date and time of the connectivity module SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 66 NTP – Manually: Using the "SIDRIVE IQ Config" application and the "BLE name", establish a connection to the connectivity module. The mobile device time is transferred to the connectivity module. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 67: Changing The Attachment Position Of The Mounting Bracket

    If the mounting position used for mounting in the factory is unsuitable because of the available space, you can mount the connectivity module on the opposite side of the motor (see Chapter Mounting the mounting bracket (Page 22)). SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 68 Maintenance 8.5 Changing the attachment position of the mounting bracket SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 69: Disposal

    ● When disposing of the product or waste that occurs in the individual lifecycle phases, carefully comply with country-specific legislation. ● Please contact your local authorities for more information about disposal. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 70: Disposing Of The Connectivity Module

    5. Dispose of the connectivity module in compliance with the applicable national regulations or recycle it. Comply with the directive of the European Parliament and Counsel regarding old electrical and electronic devices (http://eur-lex.europa.eu/legal-content/EN/TXT/? uri=CELEX:32012L0019). SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 71: Disposing Of The Battery

    ● Dispose of used lithium batteries individually as special waste. ● Dispose of used lithium batteries in compliance with all of the local regulations. ● Used lithium batteries can be recycled. Recycle your old batteries! SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 72 Disposal 9.2 Disposing of the battery SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 73: Further Information

    (https://www.youtube.com/watch? v=RShjaqjapxo) Using open-source software (OSS) Open-source software is used in the product SIMOTICS CONNECT 400 either unchanged or modified by us. License conditions and open-source software used that have to be published are stored on the CD-ROM supplied with SIMOTICS CONNECT 400.

  • Page 74: Product Support

    A list of available spare parts is available through the spare parts service "Spares on Web (https://www.sow.siemens.com/)" by selecting the serial number and the MLFB of the motor. In SIDRIVE IQ Fleet in the "Fleet" application area, you will find the link to "Spares On Web" for each configured asset.
  • Page 75 Further information 10.2 Product support Spare parts for the connectivity module You can order spare parts through the regional Siemens support organization. When ordering spare parts, enter the following data: ● Order number of the connectivity module ● Serial number of the motor on which the connectivity module is mounted ●...

  • Page 76: Technical Data

    SIMOTICS CONNECT 400 with integrated sensors monitors the condition of the motor to provide information about motor operation and to enable optimization of the application and process. SIMOTICS CONNECT 400 can only be used in combination with the "SIDRIVE IQ Fleet" MindSphere application. Monitoring application...
  • Page 77 Weight of the connectivity module, ap‐ 0.25 kg prox. Weight of the Connectivity Kit, including 0.50 kg mounting accessories, approx. Documentation and information Further technical product information and documentation is available at: www.siemens.com/digital-motor (www.siemens.com/digital-motor) SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...

  • Page 78: Directives And Standards

    The product meets the requirements if you observe the installation guidelines and safety instructions provided in these operating instructions. Radio Equipment Directive 2014/53/EU SIMOTICS CONNECT 400 complies with the Radio Equipment Directive 2014/53/EU. You can download the certificate at the following link: Declaration of Conformity (https://support.industry.siemens.com/cs/ww/en/view/109771797)
  • Page 79 This equipment must be installed and operated at a minimum distance of 20 cm between the device and users or bystanders. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 80 เครื ่ อ งโทรคมนาคมและอุ ป กรณ์ น มี ้ ◌ ี ค วามสอดคล ้องตามมาตรฐานหรื อ ข ้อกํ า หนดทางเทคนิ ค ของ กสทช. Australia and New Zealand (RCM, formerly C-Tick) SIMOTICS CONNECT 400 meets the requirements for RCM, Australia and New Zealand SIMOTICS CONNECT 400 meets the requirements for IMDA, Singapore.

  • Page 81: Index

    Identifying the connectivity module, 51 Spares on Web, 72 Identifying the firmware version, 57 Spares on Web, 72 Installing SIDRIVE IQ Config, 26 Start onboarding, 36 Storage conditions, 16 Synchronization intervals, 52 Logging in, 30 SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 82 Index Technical Support, 72 Transport conditions, 16 Updating SIDRIVE IQ Config, 57 Updating the firmware, 57 Visual inspection, 15 SIMOTICS CONNECT 400 Operating Instructions, 05/2020, A5E50161952A AA...
  • Page 84 Further Information https://www.siemens.com/sidrive-iq Siemens AG Digital Industries Postfach 48 48 90026 Nürnberg GERMANY...

Table of Contents