Siemens Simovert Masterdrives Compendium page 191

Parameterizing Steps
Downloading with
the OP1S
6-26
The OP1S operator control panel is capable of upreading parameter
(Upread or Upload) sets from the units and storing them. These
parameter sets can then be transferred to other units by download.
Downloading with the OP1S is thus the preferred method of
parameterizing replacement units in a service case.
During downloading with the OP1S, it is assumed that the units are in
the as-delivered state. The parameters for the power section definition
are thus not transferred. If a PIN has been entered to release optional
technology functions, this is also not overwritten during downloading.
(Refer to Section "Detailed parameterization, power section definition")
Parameter number
P060
P070
P072
P073
P700
P701
P702
P703
U977
Table 6-5 Parameters you cannot overwrite during download
Parameter name
Menu selection
Order No. 6SE70..
Rtd Drive Amps(n)
Rtd Drive Power(n)
IF bus address
IF baudrate
IF no. of PKW
IF no. of PZD
PIN
6SE7087-6QX70 (Version AN)
Compendium Motion Control
08.2012
Siemens AG
SIMOVERT MASTERDRIVES