4.
Screw on nut (9) and tighten it until the piston is
against the housing (1).
NOTE: Be careful not to damage the piston seal and O
- ring.
5.
Apply a cable tie (1) around the piston seal and the
O - ring and position the piston in the inner housing
(1).
6.
Insert four bolts (19)with washers and tighten
them alternately until the seals are in housing (1).
Remove the cable tie.
7.
Install shims (15) and tighten four bolts (19).
TRAVELLING - PARKING BRAKE Hydraulic
9691 1 27/05/2004
D.32.C / 18
4
ZDA4946A
5
ZDA5078A
6
ZDA5079A
7
ZDA4938A