Case IH AFX8010 Repair Manual page 1229

8. Install shifting drive gear housing (3) and tighten
four special bolts (1) and bolt (2). Torque the M6
bolts to 10 - 11 Nm(7 - 8 lb ft)
9.
Insert the shifting drive gear from the inside of the
gearbox and install the friction ring and retaining
ring (1).
10. Install electric motor. (2). Install special bolts and
washers (1).Torque the M6 bolts to 10 - 11 Nm (7
- 8 lb ft) .
NOTE: If necessary to change gears manually while
assembling the input shaft, the drive shaft and the
differential into the gearbox, wait for installing the electric
motor until the end.
POWER TRAIN - TRANSMISSION Mechanical
9680 1 27/05/2004
C.20.B / 39
8
3346b
9
3347a
10
3345a