Case IH AFX8010 Repair Manual page 1456

7. Remove the backing plate retaining ring (5) , the
clutch backing plate (4) , the clutch friction plates (3)
and separator plates (2).
8. Remove the retaining ring (5) , piston return spring
retainer (4) , piston return spring (3) and the piston
(2) assembly.
NOTE: When removing the snap ring be careful of the
force from the spring pressure. You will need to place
the assembly in a press to hold down the spring while
removing the snap ring. Once the snap ring is removed,
slowly release the press.
NOTE: To remove the piston use compressed air inserted
in the shaft hole between the two seals on the end of the
shaft.
9. Remove all the seals (1), (2), (3) from the clutch
piston.
10. Remove the two seals (1) from the brake end of the
shaft as well.
POWER TRAIN - PROCESS DRIVE Primary process drive
9683 1 27/05/2004
C.50.B / 8
7
10035842A5
8
10035841A5
9
10035840A5
10
10035847A5