Case IH AFX8010 Repair Manual page 2097

9. Remove the bolts (1) securing the bearing plate (2).
Remove the bearing plate securing the rotor.
10. Attach the tool mounting plate to the front of the
rotor first by using the eyebolts (1) to secure it.
IMPORTANT: Be sure the eyebolts are tight and the plate
is secure to the rotor! If stress is placed on the rotor stub
shaft it will result in damage to the rotor.
11. Install the rotor removal tool (1) (tool #380000806)
onto a forklift. Remove the rear support brace (2)
from the tool.
12. Attach the tool to the forklift using chains (1). This is
to ensure the tool will not slide off of the forklift.
CROP PROCESSING - THRESHING Axial flow threshing
9714 1 27/05/2004
K.40.C / 27
6
10030050A4
7
10030054A4
8
10030055A4
9
10033724A4