6.
Check the conditions of seals (6). If necessary,
replace them.
NOTE: In case the seals are replaced, bleed the brakes
described in SERVICE BRAKE Hydraulic - Bleed
(D.30.C - F.35.A.25) after replacing the pads.
7.
Push the brake pistons in their housing to allow the
installation of new brake pads.
Install new brake pads.
8.
Secure brake pads with pins (4).
9.
Connect electric wires at (3). Install cover and bolts.
Torque bolts 4 - 6 Nm (3 - 4.5 lb ft).
TRAVELLING - SERVICE BRAKE Hydraulic
9690 1 27/05/2004
D.30.C / 7
4
ZDA5219A
5
ZDA5218A
6
ZDA5217A