Case IH AFX8010 Repair Manual page 1930

A. If 12 volts is present, continue with step 7.
B. If 12 volts is not present, there is an open circuit in the front frame (FF) harness between connector
X021 pin P and connector X017 pin J3-1 wire 560 white. Locate the open and repair.
7. Visually inspect the harness and connectors for damage, bent or dislocated pins, corroded terminals or
broken wires.
A. If no damage is found, erase the fault code and continue operation.
CROP PROCESSING - FEEDING Reel feeding
9710 1 27/05/2004
K.25.B / 4