Case IH AFX8010 Repair Manual page 2090

12. Tap back of shaft and extract it from housing
using driver. Disassemble outer ring (12) from the
housing, using driver and hammer. Disassemble
snap ring (11), shim (10), gear (14), shim (8), shift
collar (7), snap ring (6), shim (4), gear (5) and shim
(4)from the shaft (1). Disassemble outer ring (2)
and shim (3) from the housing.
13. Disassemble needle bearings (1) and snap ring (2)
from the gear (3). Disassemble needle bearings (4)
and snap ring (5) from the gear (6).
CROP PROCESSING - THRESHING Axial flow threshing
9714 1 27/05/2004
K.40.C / 20
12
10041875A5
13
10041876A5